DIN5510-2 Preventive fire protection in railway vehicles - Standard
DIN5510-2: Preventive fire protection inrailway vehicles Part 2: Fire behaviour and fire side effects of materials andparts, classification, requirement and test methods
DIN5510-2 Preventive fire protection inrailway vehicles - Introduction
DIN5510-2 determinate the fire classification of railway vehicle material and structure by burning behaviour, smoke density, dropping behavieour and toxicity.
DIN5510-2 Preventive fire protectionin railway vehicles - Test Method
Small parts (Handle, AD panel)
- Test Method: DIN 53438 –Testing ofcombustible materials; response to ignition by a small flame
- Classification: S1
Structure(Seal,Wall)
- Test Method: DIN 54837 - Testing ofmaterials, small components and component sections for rail vehicles -Determination of burning behaviour using a gas burner
- Classification: S2-S5, ST1-ST2,SR1-SR2
Burning Class | S2 | S3 | S4 | S5 |
Destroy | ≤30cm | ≤25cm | ≤20cm | 0cm |
After flame | Extinguish after test | ≤100s | ≤10s | 0s |
Drop Class | ST1 | ST2 | Smoke Class | SR1 | SR2 | |
Dropping | Yes | No | Smoke | ≤100%.min | ≤50%.min |
Flooring(including adhesive and glue)
- Test Method: ISO 9239-1 Reaction tofire tests for floorings -- Part 1: Determination of the burning behaviourusing a radiant heat source
- Classification: SF1-SF3
Classification | SF1 | SF2 | SF3 |
CHF | ≥2.5kw/m2 | ≥2.5kw/m2 | ≥4.5kw/m2 |
Smoke | -- | ≤2500%min | ≤750%min |
Seat
- Test Method:DIN EN 1021-1 and DIN EN 1021-2
Electrical device
- Test Method:EN 60695
Cable& Wire
- DIN EN 60332-1-2 Tests on electric andoptical fibre cables under fire conditions
- DIN EN 50266-2-4 Common Test Methodsfor Cables under Fire Conditions
- DIN EN 61034-2 smoke density of cables burning under defined conditions
Note: Smoke toxic test according newversion DIN 5510-2:2009:05, DIN EN ISO 5659-2, Smoke toxic test (toxicitymeasured with FTIR): FED<1
DIN5510-2 Preventive fire protection inrailway vehicles - Reference standard
DIN 54837 Determination of burning behavior using a gas burner
DIN 53438-2 Response to ignition by a small flame; edge ignition
DIN 53438-3 Response to ignition by a small flame; surface ignition
DIN EN ISO 5659-2 Determination of optical density by a single-chamber test